You are currently browsing the Robe website for the region South-East Asia. You can change region and language here.

South-east Asia / EN

You are currently browsing the Robe website for the region South-East Asia. You can change region and language here.

T11 Profile™

T11 Profile™ | ROBE lighting

T11 Profile™

Our unique T11 Profile™ delivers both superb performance and total generic flexibility!

Read More...

Building on the superb MSL™ (Multi-Spectral Light) colour concept, and innovative TE™ technology, our T11 Profile™ maintains the exceptional colour finesse of the phenomenally successful T-Series. With a fast, interchangeable front lens system, the T11 Profile™ offers absolute, cost-effective flexibility while delivering superb optical quality.

With the MSL-TE™ 350W LED Engine generating over 12.000 lm from the Profile fixture and all the advantages of cost, exchange or replacement, this LED technology provides identical colour characteristics, responses, and control of T series luminaires, giving absolute colour consistency across your Robe lighting installation.

A virtually controlled CCT range of 2.700K to 8.000K (extended range 1.800K – 10.000K), calibrated whites, and tungsten emulation gives precise control, while we ensure skin tones are perfectly rendered due to T11’s high TLCI and TM30-18 ratings and exceptional CRI of 95.

Capitalizing on the benefits of TRANSFERABLE ENGINES to address the need for task-specific LED solutions, we introduce two additional TRANSFERABLE ENGINE options. The TE™ 350 LED DL (Daylight) White 6.000 K engine boasts a CRI of 97 and yields over 6.800 lm, while the TE™ 350 LED TGW (Tungsten White) White 3.200 K engine delivers over 5.500 lm with a CRI of 97, as measured in an integrating sphere.

High-definition optics deliver precise projection, beam control, and an extreme, wide-ranging 10:1 ratio 5-50° zoom range, from its single, integral lens tube, without additional lens tubes or optical variants.

Our innovative manual shuttering system, functioning as an internal barn door, is both accurate and easy to use. Fitted in the fixture is a manual 1° MagFrost™ for instant softening, with a 5° MagFrost™ stored on the magnetic holder within the fixture. Other optional frosts are available.

The unobtrusive T11 is specifically designed to operate in any noise-sensitive environment, with TV studio use enhanced via Cpulse™ flicker-free software and a dedicated plus and minus green channel control.

To increase gobo capacity from the single breakup gobo and holder included with the fixture, an optional drop-in module with two rotating and three static gobos using our standard slot and lock system is available. Furthermore, a motorised iris is included. Easy to install, this allows dual projection of both static and rotating gobos to produce dynamic effects.

Utilizing the rapid-change front lens system, the T11 Profile™ quickly transforms into a Fresnel or PC fixture for total luminaire flexibility without the cost of separate generic purchases.

T11 The three into one generic solution!

Light source

TE™ 350W Multi-Spectral LED engine

Light output

12.000 lm, CRI 95+, + - Green Correction Function, Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K up to 25.000Hz

Zoom range

manual 5°- 50°

Effects

manual Framing shutters, Frost, Static gobo, optional drop-in module with motorised Iris, Static and Rotating gobo.

Innovations
TE™ – Robe’s Transferable LED Engines
TE™ – Robe’s Transferable LED Engines

The TE™ technology addresses the problem of performance longevity of ageing LEDs by making the exchange of the engine a simple procedure that can be carried out in just a few minutes. But transferable means so much more than replaceable! Different sources can be fitted to one fixture depending on task. Every TE™ engine has its own, unique memory with all engine data of its usage.

MSL™ – Multi Spectral Light Source
MSL™ – Multi Spectral Light Source

Robe's MSL™ (Multi-Spectral Light) patented LED light engines are, specifically, designed to consistently deliver the highest quality light through the additive colour mixing method. The MSL spreads the emitted light equally throughout the Planck curve, thereby providing the widest possible colour gamut, while simultaneously delivering seamless full range CCT control. 

DataSwatch™ – inbuilt virtual colour library
DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

REAP™ – Robe Ethernet Access Portal
REAP™ – Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Cpulse™ – Pulse Width Modulation Control
Cpulse™ – Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency, from either the fixture's onboard display or remotely via DMX. By frequency manipulation in a range from 800 Hz to 25 kH, you ensure no flicker will be visible on any camera system including the latest HD & UHD models, ready for 8K and 16K. This means our fixtures can be used with all the latest cameras types for TV, video and film applications.

+ - Green Correction
+ - Green Correction

Green is a crucial colour for the TV and broadcast industry. To address this, Robe has incorporated a dedicated +/- green control channel in the fixtures featuring MSL™ Multi-spectral LED light sources, utilizing innovative algorithms. This allows precise and consistent adjustments of green content across the light beam. This seamless control offers vision controllers significantly greater flexibility in challenging lighting applications.

GDTF – General Device Type Format
GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

airLOC™
airLOC™

AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements in the luminaire.

Epass™
Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

Slot & Lock Gobos
Slot & Lock Gobos

Robe's patented Slot & Lock system allows for easy and fast replacement of both rotatable and indexable gobos.

MagFrost™
MagFrost™

There is no need to be stuck with frosts supplied with the fixture! Robe’s MagFrost™ magnetic paddle system provides you with quickly exchangeable frosts, enabling you to select those most suitable for your production. 0.5°, 1°, 3.5°, 5°, 10°, 20° and 30° frosts are available.

Full Travel Frost
Full Travel Frost

We are dedicated to equipping lighting designers with unparalleled tools that empower them to achieve their creative vision without constraints.

Product Video

T11 product video

Gobos&Colours

Rotating Gobo Wheel

Rotating Gobo Wheel

Fixed Gobo Wheel

Fixed Gobo Wheel

Fixed Gobo Wheel 1

Fixed Gobo Wheel 1

Focus image

Technical Specification

Source

Light source type: MSL-TE™ 350W LED Engine (Patented)

LED Engine output: 16.700 lm

LED life expectancy: min. 50.000 hours

Colour rendition:

  • CRI: 95, CRI R9: 96, TM30-18 Rf: 92, TM30-18 Rg: 106, TLCI: 91

Typical lumen maintenance: L70/B50 @ 40.000 hours

Light source warranty: 4 years or 50.000 hours

Optical system
Main features
Control and programming
Rotating gobos
Static gobos
Thermal specification
Electrical specification and connections
Approvals
Mechanical specification
Rigging
Included items
Optional accessories
Legal

ROBE Lighting uses cookies. We use cookies to personalise content and ads and to analyse our traffic. Please see “More about cookies” to learn more about how they are used on our website. Click “I agree” to activate them or “Close and just use cookies not requiring consent” if you do not want them. You can change your settings on "Cookies" in the footer at any time.