You are currently browsing the Robe website for the region South-East Asia. You can change region and language here.

South-east Asia / EN

You are currently browsing the Robe website for the region South-East Asia. You can change region and language here.

iBeam 350™

IP65
iBeam 350™ | ROBE lighting

iBeam 350™

IP65

Bigger, bolder, brighter, and now weatherproof! Robe’s highly successful LEDBeam 350™ has arrived in its wet weather gear to deliver punch and presence, creating even more fast-sweeping beams and gorgeous washes outdoors.

Read More...

Joining the Robe iSeries, the IP65-rated iBeam 350™ retains all the qualities and features of its highly successful indoor brother, the LEDBeam 350™. Our groundbreaking, self-managing, low-maintenance ingress protection technology allows outdoor use of this classic indoor wash fixture by removing the threat of rain, dust, humidity, smoke or haze damage, even in the harshest conditions.

As with other fixtures in the iSeries they maintain an identical DMX map, similar footprint, and minimal weight difference the iBeam 350™ and LEDBeam 350™ can used within the same lighting rig!

The onboard patented RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control. This active monitoring system automatically removes any moisture detected within the fixture, providing constant monitoring to ensure peak performance.

Outdoor fixtures need to operate in extreme cold. iBeam 350™ contains an innovative POLAR+™ technology - a special standby mode with low power consumption, in which the fixture´s sensors and communications channels remain active. When activated, POLAR+™ automatically maintains an internal temperature level, giving instant operability down to minus 50 degrees centigrade!

The iBeam 350™ runs a self pressure test and sensors automatically log when a cover was removed and replaced. This self-test, taking under 3 minutes, provides an error message if gaskets and covers were not replaced correctly or locking screws tightened, ensuring maximum protection.

Their lightweight aluminium alloy structure provides a dust-free environment for the optics. This eliminates the need for frequent cleaning, routine maintenance, and UV damage to plastic parts.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even without power, directly from your mobile device using the Robe Com app. iBeam 350™ features a spectacular 3.8° to 52° zoom range and 7.800 lumen output from their 12 x 40W RGBW multichips with colour mixing available via CMY or RGB control.

For quick programming, our DataSwatch™ onboard colour library contains 66 premixed colours and tones, including whites, for fast, reliable colour selection. Robe’s advanced L3™ dimming software takes care of imperceptible fades to black.

Cpulse™, our highly respected Pulse Width Modulation control system, ensures the removal of any on-screen camera flicker, making iBeam 350’s eminently suitable for work with the most advanced cameras. Being exceptionally quiet due to the advanced cooling system and new super smooth zoom stepper motors, tungsten lamp emulation for 750W, 1.000W, 1.200W, 2.000W and 2.500W lamps, and a variable CTO from 2.700K to 8.000K, the fixture is ideal for noise sensitive areas.

Our REAP™ (Robe Ethernet Access Portal) allows access to fixture information and diagnostics over Ethernet Networks. Perfect for installations requiring remote centralised monitoring of fixture performance.

iBeam 350™ - Robe reliability in all weathers

Light source

12x 40 W RGBW LED multichips

Light output

7.800 lm, 31.500 lx @ 5 m

Zoom range

3.8° - 52°

Innovations
RLCT™ – Robe lens coating technology
RLCT™ – Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

DataSwatch™ – inbuilt virtual colour library
DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

image/svg+xml
Tungsten Emulation
Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

image/svg+xml
Robe NFC controller and app
Robe NFC controller and app

The Robe COM application is an app based on NFC (Near Field Communication). It can be used to access to fixture’s settings of our NFC-based navigation display systems as well as reading out data of our TE™ Transferable Engines.

POLAR+™
POLAR+™

Outdoor fixtures need to operate in extreme cold. Therefore, Robe iSeries™ fixtures contain an innovative POLAR+™ technology - a special standby mode with low power consumption, in which the fixture's sensors and communications channels continue to function.

L3™ – Low Light Linearity System
L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

image/svg+xml
REAP™ – Robe Ethernet Access Portal
REAP™ – Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Cpulse™ – Pulse Width Modulation Control
Cpulse™ – Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency, from either the fixture's onboard display or remotely via DMX. By frequency manipulation in a range from 800 Hz to 25 kH, you ensure no flicker will be visible on any camera system including the latest HD & UHD models, ready for 8K and 16K. This means our fixtures can be used with all the latest cameras types for TV, video and film applications.

GDTF – General Device Type Format
GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Epass™
Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

image/svg+xml
QVGA Robe Touch Screen Display System
QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

RAINS™ – Robe Automatic Ingress Protection System
RAINS™ – Robe Automatic Ingress Protection System

The highly advanced patented RAINS™ (Robe Automatic Ingress Protection System) technology not only prevents ingress. It actively manages a fixture's internal microclimate removing internal moisture build-up caused by constant heating and cooling to provide maximum protection for electronics, revolutionising how outdoor fixtures are managed and protected.

Product Video

iSeries product video 2023

Technical Specification

Source

Light source type: 12 x 40W RGBW multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system
Dynamic Effects and Features
Control and programming
Movement
Thermal specification
Noise Levels
Electrical specification and connections
Approvals
Mechanical specification
Rigging
Included items
Optional accessories
Legal

ROBE Lighting uses cookies. We use cookies to personalise content and ads and to analyse our traffic. Please see “More about cookies” to learn more about how they are used on our website. Click “I agree” to activate them or “Close and just use cookies not requiring consent” if you do not want them. You can change your settings on "Cookies" in the footer at any time.